Old Singer sewing machine

Currently learning to work a bit with an old Singer VS3 hand sewing machine made in 1890.
When new a machine like this would cost you about a month's wages, but nowadays these can be bought for only a handful of euro's.
I paid 10 Euro for mine, and there are literally dozens more where this one came from for similar prices.

These high quality machines were made well before the era of planned obsolescence, and are basically indestructible.
The inner workings on this one were covered in a shiny brown veneer that once used to be whale oil, but once that was removed and replaced by a few drops of 5 weight Nano-Oil here and there the machine works almost like new again.
Also disassembled the wiggly wood parts to remove the remnants of the dried out bone glue, and then reglued everything with a good quality waterproof wood glue.
Very useful if you want to take the machine with you to use in places without power sockets.

The machine uses 15x1 size needles and easily stitches two parts of an old leather belt together (total leather thickness ~7,35 mm), so it just might work to make a simple leather knife sheath now and then (if i don't use overly thick leather)
Also does very well for jeans, t-shirts, bed linen, etc.

Also found this wonderful 1934 documentary about the manufacturing processes involved in making a Singer sewing machine at Clydebank, Glasgow, from its raw form of iron to the finished product packed and ready for export.
Sadly without sound, but well worth it (if you like these kind of things)

https://movingimage.nls.uk/film/1592

​

Zitat von Wulfher

Moin

That`s a Beauty and Slow Motion Working is Relaxing .

Regards Wulfher

Indeed, there is something about tinkering and then working with old machines like these,

This is my second machine, a model 128 in a treadle, dating from 1925.
We found it standing on the pavement in front of the home of an older lady, who was going to a smaller apartment and wanted to get rid of it.
She still remembered her grandmother working with it back in the 1930's, but her mother and she had only kept it all these years for home decoration.
For 15 Euro we could take it with us

Sadly a few rainy days and nights outside had damaged the wooden table and case somewhat, but the machine itself was still unharmed as it had been covered by the wooden case.
After i sanded the table i liked the wood grain so much (i think it may be red cedar) that i only treated it with several layers of a good quality mineral oil, and the drawers which normally hang under the table will get the same treatment.
The machine has been cleaned and oiled, it has been fitted with a new rubber wheel for it's bobbin winder, and a new leather belt that connects the treadle with the machine is on it's way. (E-Bay)
The treadle mechanism itself already ran smooth & silently on it's ball bearings, but i gave those a few drops of 5 weight Nano-Oil anyway.